"Design and Manufacturing of Superior Specialty Winches"
TW2000 - BACKSTOP WINCH |
|
 |
 |
 |
 |
 |
 |
| Revision Control No: 2000-S1 | TORK WINCH Specification Sheet | |
| Product Name | Backstop Winch | |
| Model Number | TW2000 | |
|
||
| Max. Safe Working Load | Designed to lift a vertical weight of 1000 lbs./453kg., a backstop assembly weighing 1800 lbs./820 kg. . |
|
| Load Type | Vertical lifting, pulling on a slope or pulling horizontally. | |
| Rope Type | 1/4" / 6 mm 7 x 19 aircraft cable. Rope not supplied with winch. | |
| Rope Travel | 25 feet / 7.5 meters on one layer. A second layer, for 45 feet / 13.5 meters total, may be wound on if required. | |
| Rope Speed | 12 feet per minute / 3.5 meters per minute. | |
| Electrical Characteristics | 110 Volts, 60 cycle. Other voltages and frequencies on special order. | |
| Motor | 1 HP / .75 KW. | |
| Full Load Amperage | 13 amps. | |
| Motor Type | Instant reverse, low maximum current draw design, thermally protected. |
|
| Duty Cycle | Standard: 10 minutes on, 20 minutes off. Other duty cycles may be available with alternative motors. Submit details of application to factory. | |
| Gear Reduction | Proprietary composite self lubricating gearing with no oil bath. | |
| Rope Drum | Grooved for accurate winding. Supported in large diameter ball bearings and with positive, through-the-drum type rope anchoring. | |
| Braking | Double, self-locking worm gearing plus passive uni-directional brake. | |
| Pressure Roller | Constant pressure type with torsion spring mounting. | |
| Limit Switches | Heavy duty upper and lower switches, gear driven for high accuracy. Maximum travel 45 feet / 13.8 meters. |
|
| Frame Construction | Precision interlocking steel frame for high rigidity and precise
alignment. Semi enclosed for safety. Powder coated for corrosion resistance. |
|
| Weight (as shipped) | 64 lbs. | |
Warning: For indoor use only |
||
Other related documents 2000-01 Specifications |
||
| Specifications subject to change without notice. | ||